The Latest In Carbide Endmill Designs In A Lengthy And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in several milling operations with Iscar's completely new Chatterfree carbide endmill. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the chief source of chatter. This guarantees faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, end users also report longer edge life due to reduced chatter. The chatter-free element is presented in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These completely new endmills are excellent for reduced power machines with ISO40 or BT40 adaptations. The solid carbide version can cope with full slot machining up to 2xD. Depth capability on the replaceable-tip construction is more bounded since the active length is shorter. In full slotting applications on alloy steel, the solid carbide version conveniently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.
FINISHRED - Revolutionary Solid Carbide Endmills
Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a unprecedented solid carbide endmill family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more rapidly and adeptly than traditional endmills. Nevertheless, roughing endmills leave grooves on the machined surface. Accordingly, after using a roughing endmill, a finishing endmill has to be used in order to obtain a smooth surface finish. This means time-consuming tool change, setup time and essentialness of maintaining 2 endmill types in the inventory.
Features of the Finishred Endmills:
The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, 2 serrated flutes and 2 continuous flutes.
The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a smooth surface finish.
The tool is fully effective and enables running at rough machining parameters, ending in finish surface quality.
The exceptional tool design lessens vibration at high load applications.
The tool produces short and long chips concurrently. This chip mixture is evacuated more successfully than each individual chip type, an remarkable solution in slotting and cavity milling applications.
The Finishred is also available with the Multi-Master indexable milling head option which merges the Finishred features with the benefit of little setup time, no regrinding costs and the extensive range of shank and extension choices are available for the Multi-Master milling heads.
A single tool replaces the roughing and finishing endmills; therefore decreasing stock.
Tool change and setup time can be eradicated.
An extra tool position is gained on the machine
New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates
ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The new endmills are obtainable with 3 and 4 38 degree flutes in grade IC900. They feature 2xD and long shanks with decreased neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting capability and force distribution can be used very comfortably on low power machines (CAT40/BT40/ISO40). The serrated cutting edge features flat peaks which leave a better surface finish, in comparison to the current rougher carbide endmill. The ECP endmills are endorsed for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the introductory tests conducted at several customers' locations showed fantastic results.
Iscar Adds Their Latest Creations To A Long Line Of Outstanding Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Iscar Recently Releases Numerous Revolutionary Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Iscar Announces A Revolutionary Family Of Slitting Cutters Utilizing Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Some Improvements Have Enlarged Iscar's Line Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
A Handful Of Upgrades In Carbide Inserts Due To Iscar Over The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Revolutionary End Mills From Iscar Can Multiply Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Automotive Manufacturing Jobs - What To Watch Out For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.
Justification Of Automotive Engineering Jobs.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.